11 sizes · WERTEC
MATRIX Diamond Core Bits M14 with Two Diamond Grades
Vacuum-brazed M14 bits with fine diamond at the tip for a clean start and coarser diamond above for fast debris removal.
- Two diamond grades
- Vacuum-brazed
- Approx. 8000 rpm
- Dry with cooling wax
Available through WERTEC distributors. Send an enquiry – we will tell you where to buy in your country.
Porcelain stoneware is hard enough to defeat ordinary drills quickly. MATRIX core bits have a vacuum-brazed diamond layer intended for hard materials: porcelain, sintered stone, granite and ceramic tiles. Fit on an M14 angle grinder and drill without hammer.
The diamond comes in two grades – fine at the tip for a clean cut-in, coarser higher up for fast debris removal. Optimum speed approx. 8000 rpm, dry with cooling wax.
Sizes and codes
| Code | Diameter | EAN |
|---|---|---|
| WTAM06 | 6 mm | 5901721737570 |
| WTAM08 | 8 mm | 5901721737587 |
| WTAM10 | 10 mm | 5901721737594 |
| WTAM12 | 12 mm | 5901721737600 |
| WTAM16 | 16 mm | 5901721737617 |
| WTAM20 | 20 mm | 5901721737402 |
| WTAM25 | 25 mm | 5901721737419 |
| WTAM35 | 35 mm | 5901721737440 |
| WTAM45 | 45 mm | 5901721737457 |
| WTAM55 | 55 mm | 5901721737464 |
| WTAM68 | 68 mm | 5901721737471 |
| Code | Diameter | EAN |
|---|---|---|
| WTAM06 | 6 mm | 5901721737570 |
| WTAM08 | 8 mm | 5901721737587 |
| WTAM10 | 10 mm | 5901721737594 |
| WTAM12 | 12 mm | 5901721737600 |
| WTAM16 | 16 mm | 5901721737617 |
| WTAM20 | 20 mm | 5901721737402 |
| WTAM25 | 25 mm | 5901721737419 |
| WTAM35 | 35 mm | 5901721737440 |
| WTAM45 | 45 mm | 5901721737457 |
| WTAM55 | 55 mm | 5901721737464 |
| WTAM68 | 68 mm | 5901721737471 |
| Mounting | M14 thread (angle grinder) |
| Cutting layer | vacuum-brazed diamond, two grades |
| Speed | approx. 8000 rpm |
| Operation | dry, with cooling wax |
| Materials | porcelain stoneware, sintered stone, granite, ceramic tiles |
| Brand | WERTEC |
Related products
BLUE Fine-Grit Diamond Core Bits M14 for Porcelain
Via distributorsDetails →
TurboSpeed Diamond Core Bits M14 for Porcelain (6–110 mm)
Via distributorsDetails →
Electroplated Diamond Core Bits for Drills (wet drilling)
Via distributorsDetails →