11 sizes · WERTEC
TurboSpeed Diamond Core Bits M14 for Porcelain (6–110 mm)
Turbo-rim core bits for angle grinders – fast drilling with a good edge in porcelain, ceramic tiles and stone.
- Turbo diamond rim – fast cutting, good edge
- M14 thread
- 6 to 110 mm
Available through WERTEC distributors. Send an enquiry – we will tell you where to buy in your country.
TurboSpeed core bits for M14 angle grinders drill pipe and conduit passages – water connections, mixer tap outlets and valves. The turbo diamond rim drills fast while keeping a good hole edge in porcelain stoneware, ceramic tiles and stone. Rotary drilling, no hammer.
Sizes and codes
| Code | Diameter | EAN |
|---|---|---|
| WTATS06 | 6 mm | 5901721738256 |
| WTATS08 | 8 mm | 5901721738263 |
| WTATS10 | 10 mm | 5901721738270 |
| WTATS12 | 12 mm | 5901721738287 |
| WTATS20 | 20 mm | 5901721738447 |
| WTATS25 | 25 mm | 5901721738294 |
| WTATS35 | 35 mm | 5901721738300 |
| WTATS48 | 48 mm | 5901721738317 |
| WTATS65 | 65 mm | 5901721738324 |
| WTATS68 | 68 mm | 5901721738331 |
| WTATS110 | 110 mm | 5901721738362 |
| Code | Diameter | EAN |
|---|---|---|
| WTATS06 | 6 mm | 5901721738256 |
| WTATS08 | 8 mm | 5901721738263 |
| WTATS10 | 10 mm | 5901721738270 |
| WTATS12 | 12 mm | 5901721738287 |
| WTATS20 | 20 mm | 5901721738447 |
| WTATS25 | 25 mm | 5901721738294 |
| WTATS35 | 35 mm | 5901721738300 |
| WTATS48 | 48 mm | 5901721738317 |
| WTATS65 | 65 mm | 5901721738324 |
| WTATS68 | 68 mm | 5901721738331 |
| WTATS110 | 110 mm | 5901721738362 |
| Mounting | M14 thread (angle grinder) |
| Rim | diamond, turbo type |
| Operation | rotary, no hammer |
| Materials | porcelain stoneware, ceramic tiles, stone |
| Series | TurboSpeed |
| Brand | WERTEC |
Related products
BLUE Fine-Grit Diamond Core Bits M14 for Porcelain
Via distributorsDetails →
MATRIX Diamond Core Bits M14 with Two Diamond Grades
Via distributorsDetails →
Electroplated Diamond Core Bits for Drills (wet drilling)
Via distributorsDetails →